Manufacturing precision solutions for HVAC, Medical Gas (MGPS), Plumbing and Industrial Engineering since 1966.
R V Metal Corporation supplies seamless copper pipes, tubes and coils for HVAC/ACR refrigeration circuits, medical gas pipeline systems (MGPS), plumbing networks and industrial engineering. For HVAC and pressure service tubing, Deoxidized High Phosphorus copper (Cu-DHP / UNS C12200) is widely preferred due to its strong brazability and improved resistance to hydrogen embrittlement compared to oxygen-bearing grades. For electrical/high-conductivity applications, Electrolytic Tough Pitch copper (Cu-ETP / UNS C11000) is commonly specified. For critical vacuum/electronics applications requiring very high purity and oxygen-free characteristics, OFE copper (UNS C10100) is used.
| Parameter | Specification |
|---|---|
| Grades |
C10100 (OFE) – Oxygen-Free Electronic copper for high purity applications C11000 (ETP) – Electrolytic Tough Pitch for high electrical conductivity C12200 (DHP) – Deoxidized High Phosphorus copper for brazing/HVAC/plumbing; improved resistance to hydrogen embrittlement |
| Standards | ASTM B88, ASTM B280, EN 1057, IS 2501 (as applicable to application and size range) |
| Temper Range | Soft Annealed O60 • Half Hard H02 • Hard H04 |
| Size Range (OD) | 1/4" to 10" (≈ 6.35 mm to 254.0 mm) – subject to product form and standard |
| Units | All dimensions supported in mm and inches on drawings, MTC and packing lists |
| Element | Typical |
|---|---|
| Cu | ≥ 99.99% |
| O | ≤ 0.0005% |
| Notes | Oxygen-free; used where conductivity + purity are critical. |
| Element | Typical |
|---|---|
| Cu | ≥ 99.90% |
| O | Typically 0.02–0.04% (grade dependent) |
| Notes | High electrical conductivity; not preferred for hydrogen-reducing brazing atmospheres. |
| Element | Typical |
|---|---|
| Cu | ≥ 99.90% (remainder) |
| P | 0.015–0.040% |
| Notes | Deoxidized grade improves brazability; reduces risk of hydrogen embrittlement in many joining conditions. |
توفر آر ڤي ميتال كوربوريشن مجموعة متكاملة من منتجات النحاس والنحاس الأصفر والكوبرونيكل وسبائك النحاس والألمنيوم والفولاذ المقاوم للصدأ — يتم تصنيعها وتوريدها وفقًا للمعايير العالمية ASTM وEN وBS وIS.
سواء كنت تحتاج إلى أنابيب نحاس لأنظمة التكييف HVAC، أو أنظمة الغازات الطبية MGPS، أو التبريد، أو المبادلات الحرارية، أو حلول سبائك النحاس المُصممة حسب الطلب — فريقنا يرد بسرعة، ويشارك البيانات الفنية، ويقدم تسعيراً تنافسياً للتصدير إلى دول الخليج.
توريد وتصدير إلى: السعودية، الإمارات، قطر، الكويت، البحرين، عُمان.
117، شارع كيكا، جولالوادِي،
مومباي – 400004، ماهاراشترا، الهند
هاتف: +91 22 6636 3026
البريد الإلكتروني:
info@rvmetco.com
رقم المسح 43/1، مجمع سواستيك، أتاك باردي، طريق دارامبور، فالساد: 396001، غوجارات، الهند
هاتف: +91 97573 74689
البريد الإلكتروني:
rvmetco@gmail.com